Tires/Tubes

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The MTB tire with the greatest range of applications. The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for difficult cross-country tracks as well as technically challenging enduro trails. The Nobby Nic got a revised tread design this season: - Modern trail bike tread with stable shoulder blocks for even more traction - Enlarged gaps between blocks for better self-cleaning - Outstanding braking and forward traction due to special center stud arrangement - Performance Line, Twinskin - ECE: E-50 - 960g

TOP CHOICE FOR ROOKIES. Proven XC and All Mountain tread design. Just right for rougher trails. Perfect for the front wheel in combination with (e.g.) Rapid Rob. Available in the wheel sizes 26“, 27.5“ and 29“ as well as the super-wide 60 mm version (27.5“ x 2.35“). - Shoulder studs for great lateral traction. - Tread inspired by the Nobby Nic - K Guard puncture protection

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

Butyl rubber bicycle tube in various sizes and valve lengths.

- Shim adds support to Presta stem used in a Schrader rim

- Standard 1mm tube thickness - Schrader valve

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Pack of 10 replacement tubeless plugs for the Tubeless Kit and Classic Tubeless Kit.

These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- 0.6 mm butyl walls

Surly Rim Strips have one job and they do it well. The 58mm nylon rim strip is purpose-built for the Clown Royal Rim, and Moonlander bike.

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

Grab the right tube for your 700C tire, just choose the valve length and tube size! When it comes to valve length: - 40mm valves are ideal for 10mm—30mm deep rims. - 60mm valves are ideal for 30mm—50mm deep rims. - 80mm valves are ideal for 60mm deep rims. And for tube size: - Check your tire's sidewall to determine its size—then choose the tube whose range includes it! For example: a 700Cx28 tire will work with the 700Cx25-32 or 700Cx28-32 tubes.